Previous image
floor box mistake finishing rings
Next image
Zoom image

Finishing Rings (in two sizes) Made in the USA

Now available in brass and brushed aluminum finishes.
 No floor box is included with these "Finishing Rings".  If you need a floor box please see section #17 on the left side of every page 
  • $49.88
Market price: $69.90, you save $20.02
  • 29% less
  • Qty:   Brushed Brass lacquer finish
    Qty:   Brushed Aluminum finish
    Qty:   #1 Pewter Matte $144.88
    Qty:   #2 Bronze $124.88
    Qty:   #3 Bronze with Gold Wash $124.88
    Qty:   #5 Gold $124.88
    Qty:   #7 Black $124.88
    Qty:   #8 Pewter Bright $144.88
    Qty:   #9 Rust $124.88
    Qty:   #10 Verdigris $124.88
    Qty:   #12 Copper Bright $124.88
    Qty:   #13 Copper Bronze $124.88
    Qty:   #15 Satin Pearl $124.88
    Qty:   #16 Antique Copper $124.88
    Qty:   #17 Weathered White $124.88
    Qty:   #20 Satin Pewter $144.88
    Qty:   #21 Antique Gold $124.88
    Qty:   #23 Brushed Natural Pewter $144.88
    Qty:   #130 Pewter with Terra-Cotta Wash $144.88
    Qty:   #132 Pewter with Bronze Wash $144.88
    Qty:   #133 Pewter with Copper Wash $144.88
    Qty:   #134 Pewter with Verdi Wash $144.88
    Qty:   #135 Pewter with White Wash $144.88
    Qty:   #137 Pewter with Cherry Wash $144.88
    Qty:   #138 Pewter with Maple Wash $144.88
    Qty:   #231 Bronze with Black Wash $124.88
    Qty:   #233 Bronze with Copper Wash $124.88
    Qty:   #234 Bronze with Verdi Wash $124.88
    Qty:   #730 Black with Terra-Cotta Wash $124.88
    Qty:   #732 Black with Bronze Wash $124.88
    Qty:   #733 Black with Copper Wash $124.88
    Qty:   #734 black with Verdi Wash $124.88
    Qty:   #736 Black with Chocolate Wash $124.88
    Qty:   #737 Black with Cherry Wash $124.88
    Qty:   #738 Black with Maple Wash $124.88
    Qty:   #739 Black with Steel Wash $124.88
    Qty:   #931 Rust with Black Wash $124.88
    Qty:   #933 Rust with Copper Wash $124.88
    Qty:   #934 Rust with Verdi Wash $124.88
  • SKU
    Finishing Rings in two sizes
Now available in Brass and Brushed Aluminum finishes
Pewter finish price increase: All Pewter finishes will have an additional refinishing charge due to the high cost of plating and polishing needed for these Pewter finishes.
Please note:  There are no floor boxes along with our Finishing Rings.  To order floor boxes, see section #17 on the left side margin of every page.
We have lowered our price on our Finishing Rings in Brass to $49.88.  But there are several Pewter finishes that require more plating and finishing and the price is an additional $55.00 for these custom Pewter finishes.  This ring will cover areas of tile or wood that has a rough edge around your round electrical floor box cover if it is damaged, or was cut improperly.  
Inside round opening (I.D.) is 4 inches, and the overall outer measurement (O.D.) at 7.5" inches is our standard size.  Also available in 4.5" (I.D.) by 7.5" (O.D.).  The Finishing Rings are also available in our 38 custom finishes for an additional charge.  Available in Brass now for $49.90, from $69.90.  However there is an extra charge of $55.00 for all custom Pewter finishes which need additional plating and refinishing required than the standard brass and aluminum standard finishes.  For custom finishes there is an additional charge of $49.90 each ring, but does include all shipping charges and there are three of them we have to do.  One to our factory, one to the finishing company, and one back to the customer.
These also can be finished in one of our 38 custom  finishes for an extra $49.90You will receive a sample chip for $3.00 at this page /Custom-Floor-Box-Sample-Chip-Finishes.html which will be refunded with your confirmed order.  Once you receive the sample finish, you will be asked to sign-off for the approved custom finish.  After the final approval, we will start your order, and these are non-refundable in custom finishes.  However, these are not intended for high traffic areas in the custom finishes.  Usually they are under a table for a lamp, or under a desk where they are seen, but not constantly walked across.
Here are some other products you might like that could go with this the finishing rings Here
Cover-up-Rings is a Brass Plated Ring at $49.90 ea.
Any 38 Custom Finishing charges $49.90 extra.
To order custom finishes CLICK HERE!
Now available in our "New Brushed Aluminum" finish
Aluminum floor box mistake finishing ring
Please read our policy for refinishing floor box covers
Thank you for your interest in refinishing your floor box cover in one of our Arnev Products, Inc. custom finishes.  For the protection of your cover, we ask that you follow these instructions.
1.  We ask that you send the COVERS ONLY Floor box covers generally come lacquer coated. To refinish the floor box covers, the lacquer must be removed, and this is done by soaking the covers in a strong chemical.  Any non-metallic parts that may be attached to the cover, including gaskets or electrical devices, receptacles, low voltage housings, etc., will be dissolved with the lacquer as well. This is why we insist that only floor box covers be sent for refinishing.  If the cover or receptacle cannot be removed from the floor box, we are unable to soak off the lacquer, and cannot refinish the cover.  Also, no plastic type covers are accepted. We are NOT responsible for the box itself, gaskets or devices, so please keep all the other parts to the assembly, take off the cover, and send only the cover. 
2.  Please package any exterior screws (screws that will be visible after the box is installed) with the cover so these can be finished to match the box.  Make sure they are secure so they don't get lost or scratch the cover in transit.
3.  Custom colors are run in batches.  Consequently, the finishing time can vary depending upon the schedule for the batch of the custom color you have chosen.  However, as we need only the cover, the floor box itself can be installed by your electrician to maintain your building or remodeling schedule.
4.  You have been advised by one of our customer service representatives that the custom finishes are approved for LOW TRAFFIC AREAS ONLY.  Should you decided to install the floor boxes with our finished in HIGH TRAFFIC AREAS, any finishing 1 year limited warranty is void.  In addition, if you should decide to apply any protective finish (lacquer, polyurethane, etc.) OVER our custom finish, the finishing 1 year limited warranty is void.
5.  If you approve the enclosed sample and agree to the instructions above, please sign and return the top portion of this page.  You may keep the bottom portion for your records.
If you follow these instructions, we are confident that you will love your custom floor box covers, and will enjoy them for years to come.
I approve of sample number______________________________ and agree to these instructions.
  • Choose a finish
    Brushed Brass lacquer finish, Brushed Aluminum finish, #1 Pewter Matte, #2 Bronze, #3 Bronze with Gold Wash, #5 Gold, #7 Black, #8 Pewter Bright, #9 Rust, #10 Verdigris, #12 Copper Bright, #13 Copper Bronze, #15 Satin Pearl, #16 Antique Copper, #17 Weathered White, #20 Satin Pewter, #21 Antique Gold, #23 Brushed Natural Pewter, #130 Pewter with Terra-Cotta Wash, #132 Pewter with Bronze Wash, #133 Pewter with Copper Wash, #134 Pewter with Verdi Wash, #135 Pewter with White Wash, #137 Pewter with Cherry Wash, #138 Pewter with Maple Wash, #231 Bronze with Black Wash, #233 Bronze with Copper Wash, #234 Bronze with Verdi Wash, #730 Black with Terra-Cotta Wash, #732 Black with Bronze Wash, #733 Black with Copper Wash, #734 black with Verdi Wash, #736 Black with Chocolate Wash, #737 Black with Cherry Wash, #738 Black with Maple Wash, #739 Black with Steel Wash, #931 Rust with Black Wash, #933 Rust with Copper Wash, #934 Rust with Verdi Wash
  • Size in 4" or 4.5" inside dimension with 7.5" outside dimension.
    Choose your size, 4" Inside diameter X 7.5" Outside diameter, 4.5" Inside diameter X 7.5" Outside diameter
  • 4-6 weeks delivery on custom finishes. All rings will ship seperately with a floor box order
    4-6 wk. delivery for custom finishes
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
  • Choose the product options first
    • $5.88

    Not rated yet
    • 40% less
  • Choose the product options first
    • $3.00

    Not rated yet
    • 25% less
  • Choose the product options first
    • $3.97

    Not rated yet
  • Choose the product options first
    • $9.88

    Not rated yet
    • 18% less
  • Choose the product options first
    • $73.82

    Not rated yet
    • 3% less
Customers who viewed this product bought
  • Choose the product options first
    • $90.72

    Not rated yet
  • Choose the product options first
    • $78.21

    Not rated yet
  • Choose the product options first
    • $73.82

    Not rated yet
    • 3% less
  • Choose the product options first
    • $114.55

    Not rated yet
    • 8% less
  • Choose the product options first
    • $9.88

    Not rated yet
    • 18% less